ASN Wikibase Occurrence # 133515
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Sunday 17 August 1997 |
Time: | 16:25 LT |
Type: | Cessna 182D |
Owner/operator: | Ronald Maglaughlin |
Registration: | N9952T |
MSN: | 53052 |
Year of manufacture: | 1961 |
Engine model: | Continental O-470 |
Fatalities: | Fatalities: 0 / Occupants: 5 |
Aircraft damage: | Destroyed |
Category: | Accident |
Location: | Derby, KS -
United States of America
|
Phase: | En route |
Nature: | Unknown |
Departure airport: | (K50) |
Destination airport: | |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:According to the pilot, the flight departed Cook Field uneventfully and attained an altitude of approximately 800 feet above ground level when the airplane experienced a complete loss of engine power. The pilot stated that, 'the windshield was covered with oil,' and by looking out the pilot's side window he was able to land uneventfully in a field. The pilot reported that the nose wheel collapsed during the landing roll and the aircraft came to rest approximately midway down the 1,600 foot grassy field. The pilot reported that all passengers exited the aircraft without injuries. The pilot reported that a short time after the occupants were clear of the accident site the airplane became engulfed in flames which eventually burned the fuselage and inboard sections of both wings. Post accident investigation showed that the number six cylinder was separated from the rest of the engine assembly, the crankshaft was fractured, and the propeller blade was fractured at the hub. Examination of the fractured propeller hub was conducted by McCaully Propeller Systems. Examination showed that propeller blade, serial number K95501YS, had failed in fatigue with the fatigue origin found located in the tread root. No anomaly or material/manufacturing defect was found. Further examination showed that the internal components of the propeller contained a substantial amount of rust and rust residue. The specified time-between-overhaul (TBO) for the accident propeller was 1,200 hours or 60 calendar months, whichever occurs first. The propeller had never been overhauled and had been in service for 19 years since new. FAA Airworthiness Directive 91-15-04, which requires the propeller model to be modified to an oil-filled type for the purpose of crack detection, was not complied with.
Probable Cause: the Airworthiness Directive and propeller overhaul not being complied with. Factors to the accident were the propeller blade retention failure and rough/uneven terrain condition.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | CHI97LA260 |
Status: | Investigation completed |
Duration: | 2 years and 6 months |
Download report: | Final report |
|
Sources:
NTSB CHI97LA260
Location
Revision history:
Date/time | Contributor | Updates |
21-Dec-2016 19:26 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
08-Apr-2024 13:27 |
ASN Update Bot |
Updated [Time, Aircraft type, Cn, Other fatalities, Phase, Departure airport, Source, Narrative, Category, Accident report] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation