ASN Wikibase Occurrence # 161329
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Wednesday 9 October 2013 |
Time: | 10:00 |
Type: | Piper PA-46-350P Malibu Mirage |
Owner/operator: | Private |
Registration: | N561C |
MSN: | 4636326 |
Year of manufacture: | 2002 |
Total airframe hrs: | 1150 hours |
Engine model: | Lycoming TI0-540-AEA2 |
Fatalities: | Fatalities: 0 / Occupants: 2 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Greene County Airport (I19), Dayton, Ohio -
United States of America
|
Phase: | Landing |
Nature: | Private |
Departure airport: | Auburn, AL (AUO) |
Destination airport: | Xenia, OH (I19) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The pilot reported that when the nosewheel touched the runway during landing, the airplane began to pull quickly to the left. He applied right brake and pulled back on the yoke, but the airplane continued to veer off the left side of the runway. The airplane traveled about 500 feet before the nose gear collapsed back into the wheel well, and the airplane’s nose and propeller impacted the ground.
The postaccident examination of the airplane revealed that the engine mount in the area of the nose gear actuator feet was fractured. As a result of similar accidents, Piper Aircraft had previously issued a Mandatory Service Bulletin (SB) No. 1103D on February 2, 2011. The purpose of the 100-hour recurring inspection specified in SB 1103D was to determine if cracks had developed on the engine mount in the area of the nose gear actuator feet. The accident occurred about 81 hours of time in service after the SB 1103D was complied with. The postaccident examination of the engine mount revealed that the paint around the engine mount attach feet area was only partially removed and not as specified in the SB. A microscopic examination of the right foot of the engine mount revealed that there were fracture features indicative of fatigue progression in many areas. Although the paint removal was not as thorough as specified in the SB, the area where the fatigue fracture was located was in the area where the paint had been removed and should have been detectable during the inspection.
Probable Cause: The nose landing gear failure as a result of a fatigue fracture of the engine mount nose gear actuator feet in an area detailed in a service bulletin. Contributing to the accident was maintenance personnel’s inadequate completion of the inspection specified in the service bulletin.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | CEN14LA006 |
Status: | Investigation completed |
Duration: | |
Download report: | Final report |
|
Sources:
NTSB
https://flightaware.com/live/flight/N561C FAA register:
http://registry.faa.gov/aircraftinquiry/NNum_Results.aspx?NNumbertxt=561C Location
Media:
Revision history:
Date/time | Contributor | Updates |
09-Oct-2013 14:45 |
gerard57 |
Added |
09-Oct-2013 14:47 |
harro |
Updated [Aircraft type, Embed code] |
09-Oct-2013 16:23 |
Geno |
Updated [Aircraft type, Registration, Cn, Operator, Location, Phase, Nature, Departure airport, Destination airport, Source, Embed code, Narrative] |
21-Dec-2016 19:28 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
29-Nov-2017 09:19 |
ASN Update Bot |
Updated [Operator, Total occupants, Other fatalities, Nature, Departure airport, Destination airport, Source, Embed code, Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation