Accident Piper PA-32R-300 Cherokee Lance N4213F,
ASN logo
ASN Wikibase Occurrence # 200711
 
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Date:Monday 30 October 2017
Time:08:26
Type:Silhouette image of generic P32R model; specific model in this crash may look slightly different    
Piper PA-32R-300 Cherokee Lance
Owner/operator:Private
Registration: N4213F
MSN: 32R-7680432
Year of manufacture:1976
Total airframe hrs:5527 hours
Engine model:Lycoming IO540-K165D
Fatalities:Fatalities: 0 / Occupants: 1
Aircraft damage: Substantial
Category:Accident
Location:Dawson County, Atlanta Motorsports Park, Dawsonville, GA -   United States of America
Phase: En route
Nature:Private
Departure airport:Gainesville, GA (GVL)
Destination airport:Gary, IN (GYY)
Investigating agency: NTSB
Confidence Rating: Accident investigation report completed and information captured
Narrative:
The private pilot was conducting a personal flight and reported that, while the airplane was climbing after takeoff, the engine began to run roughly and lose power. The pilot began a descent for an emergency landing and, during the descent, he sensed a “bad” engine vibration, which was followed by a complete loss of engine power. The pilot selected an area on an asphalt-covered automobile racetrack to make a forced landing, which resulted in substantial damage to the airplane’s wings and fuselage.  
A postaccident engine examination revealed a crack in the accessory case and a large hole in the crankcase near the No. 6 cylinder pad. A subsequent internal examination revealed damage to the engine’s internal components, including the main bearings and the No. 6 connecting rod, that was consistent with oil exhaustion.
The airplane was equipped with a remotely mounted oil filter. A B-nut on one of the oil filter lines was found to be loose with about 2 ½ threads showing. The B-nut was tightened by hand and rotated about 1 ¾ turns, which resulted in about ½ thread showing.
The pilot stated that he was not an airframe and powerplant mechanic but that he had replaced the oil line about 1 week before the accident. The accident flight was the first flight after that maintenance.


Probable Cause: The failure of the pilot, who was not a certified mechanic, to tighten the B-nut on a remotely mounted oil filter line, which resulted in oil exhaustion, a total loss of oil pressure, and a subsequent total loss of engine power.

Accident investigation:
cover
  
Investigating agency: NTSB
Report number: ANC18LA006
Status: Investigation completed
Duration: 1 year
Download report: Final report

Sources:

NTSB

FAA register: http://registry.faa.gov/aircraftinquiry/NNum_Results.aspx?NNumbertxt=N4213F

Location

Images:


Media:

Revision history:

Date/timeContributorUpdates
30-Oct-2017 15:17 gerard57 Added
30-Oct-2017 15:19 harro Updated [Aircraft type, Cn, Operator, Embed code]
30-Oct-2017 15:47 Iceman 29 Updated [Embed code]
30-Oct-2017 17:09 Geno Updated [Location, Departure airport, Destination airport, Source, Narrative]
30-Oct-2017 20:16 Iceman 29 Updated [Photo, ]
28-Nov-2018 14:45 ASN Update Bot Updated [Time, Operator, Departure airport, Destination airport, Source, Embed code, Narrative, Accident report, ]

Corrections or additions? ... Edit this accident description

The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF on social media FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2024 Flight Safety Foundation

1920 Ballenger Av, 4th Fl.
Alexandria, Virginia 22314
www.FlightSafety.org