ASN Wikibase Occurrence # 36828
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Friday 6 February 1998 |
Time: | 12:45 |
Type: | Cessna T207 Turbo Skywagon |
Owner/operator: | SouthCentral Air (SCA) |
Registration: | N91029 |
MSN: | 20700020 |
Total airframe hrs: | 11192 hours |
Fatalities: | Fatalities: 1 / Occupants: 1 |
Aircraft damage: | Destroyed |
Category: | Accident |
Location: | Homer, AK -
United States of America
|
Phase: | Unknown |
Nature: | Cargo |
Departure airport: | (HOM) |
Destination airport: | English Bay, AK (KEB) |
Confidence Rating: | Information is only available from news, social media or unofficial sources |
Narrative:The certificated commercial pilot was departing on a 14 CFR 135 cargo flight. The airplane lifted off and climbed to about 200 feet. Instead of turning right toward the intended destination, the airplane began a left turn toward the runway. The angle of bank increased to about 45 degrees. The airplane then nosed down, and descended into snow covered terrain, about 200 yards north of the runway. Examination of the engine revealed the number six cylinder head was fractured, and slightly separated from the cylinder barrel. The area around the point of separation was blackened and oily. Similar discoloration was noted on the inside of the engine cowl. A metallurgical examination of the cylinder head revealed a fatigue fracture along a large segment of the thread root radius between the 5th and 6th threads. The engine's cylinder compression is part of the operator's approved airworthiness inspection program. The number six cylinder compression, recorded 121 hours before the accident, was noted as 60 PSI. The last engine inspection, 27 hours before the accident, did not include a record of the engine compression. CAUSE: A fatigue failure, and partial separation of the number 6 engine cylinder head assembly, the operator's inadequate progressive inspection performed by company maintenance personnel, and the pilot's inadvertent stall during a maneuvering turn toward an emergency landing area.
Sources:
https://www.ntsb.gov/_layouts/ntsb.aviation/brief.aspx?ev_id=20001211X09501&key=1 Revision history:
Date/time | Contributor | Updates |
24-Oct-2008 10:30 |
ASN archive |
Added |
21-Dec-2016 19:23 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
23-Feb-2017 14:18 |
TB |
Updated [Aircraft type, Operator, Source] |
23-Feb-2017 14:19 |
TB |
Updated [Aircraft type, Nature] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation