ASN Wikibase Occurrence # 44415
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Sunday 24 July 2005 |
Time: | 17:52 |
Type: | Cessna 310Q |
Owner/operator: | Stoneair Charter Services, LLC |
Registration: | N1971W |
MSN: | 310Q0258 |
Year of manufacture: | 1971 |
Total airframe hrs: | 3944 hours |
Engine model: | Continental IO-470-VO |
Fatalities: | Fatalities: 3 / Occupants: 3 |
Aircraft damage: | Destroyed |
Category: | Accident |
Location: | Ada, OK -
United States of America
|
Phase: | Take off |
Nature: | Private |
Departure airport: | Ada, OK (ADH) |
Destination airport: | Cushing, OK (CUH) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The 1,500-hour airline transport rated pilot had just departed a 6,305-foot-long runway when, based on a viewing of security camera footage, a puff of white smoke exiting the back of the right engine shortly after the airplane became airborne. The airplane then began a right turn and flew on a westerly heading at a low altitude before it disappeared behind a tree line. A witness saw the airplane as it was in a right turn toward the north. He thought the airplane was going to land on a closed highway, but the nose of the airplane dropped and the airplane cartwheeled on the grass median west of the road. Examination of the right engine revealed that the crankshaft gear had failed due to a fatigue fracture in one of the teeth. The fatigue emanated from the pressure face of the tooth and intersected another crack emanating from the non-pressure face of the tooth, thereby producing separation of the tooth from the rim. Near the origin, post-fracture damage prevented the ability to determine if the crack initiated in fatigue or if a crack propagated in overstress through the case and then continued propagating through the core in fatigue. Upon completion of the materials examination it was evident that the microstructure of the gear was inadequate and more research into the manufacturing process was required. A review of manufacturing records indicated that approximately 2,400 crankshaft gears were made from the same batch of material as the accident gears, and were heat-treated in two groups. A review of the heat treatment records confirmed that furnace temperatures during the hardening step in each heat-treating process were not high enough to fully austenitize the material. Furthermore, the quantity and orientation of gears loaded in the furnace were greater when compared to other jobs completed for TCM. In addition, initial data from a test load similar to that used in the heat-treating process from the accident serial number gear, indicated that under these conditions, the gears might not have been fully equilibrated at temperature during the hardening step. As a result, TCM manufactured several other gears at different hardnesses and conducted failure testing to see if they could reproduce a similar failure. Even though some of the hardness levels were well below TCM standards, they were unable to produce a similar failure. In addition, there was evidence to suggest that the gear teeth may have been exposed to an excessive load at some point during its operation. The cause of the gear tooth failure could not be determined.
Probable Cause: The loss of engine power as a result of a fatigue fracture in one of the crankshaft gear teeth for undetermined reasons. Also causal was the pilot's failure to maintain control of the twin-engine airplane after the power loss, which resulted in an inadvertent stall and subsequent collision with terrain.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | DFW05FA188 |
Status: | Investigation completed |
Duration: | |
Download report: | Final report |
|
Sources:
NTSB:
https://www.ntsb.gov/_layouts/ntsb.aviation/brief.aspx?ev_id=20050801X01121&key=1 F.A.A.
Location
Revision history:
Date/time | Contributor | Updates |
28-Oct-2008 00:45 |
ASN archive |
Added |
21-Dec-2016 19:24 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
06-Dec-2017 10:42 |
ASN Update Bot |
Updated [Operator, Source, Narrative] |
16-Oct-2020 17:04 |
BEAVERSPOTTER |
Updated [Cn, Source] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation