Accident IAI 1124 Westwind VH-AJS,
ASN logo

Date:Thursday 27 April 1995
Type:Silhouette image of generic WW24 model; specific model in this crash may look slightly different    
IAI 1124 Westwind
Registration: VH-AJS
MSN: 221
Year of manufacture:1978
Total airframe hrs:11509 hours
Engine model:Garrett TFE731-3-1G
Fatalities:Fatalities: 3 / Occupants: 3
Aircraft damage: Destroyed, written off
Location:9 km NW of Alice Springs Airport, NT (ASP) -   Australia
Phase: Approach
Departure airport:Katherine-Tindal Airport, NT (KTR/YPTN)
Destination airport:Alice Springs Airport, NT (ASP/YBAS)
Investigating agency: BASI
Confidence Rating: Accident investigation report completed and information captured
The aircraft was on a scheduled freight service from Darwin via Tindal, Alice Springs, and Adelaide to Sydney. The flight from Darwin to Tindal was apparently normal, and the aircraft departed Tindal slightly ahead of schedule at 18:34 CST. On descent into Alice Springs, the crew advised on the MTAF frequency its intention to conduct a twin locator (Locator/NDB) approach to runway 12.
The Locator/NDB approach at Alice Springs involves an outbound track of 292 degrees M from the Alice Springs NDB, overhead the Temple Bar Locator to the turn point at the Simpsons Gap Locator. The initial approach altitude is 5,000 ft and the intermediate altitude at Simpsons Gap is 4,300 ft. The inbound track is 112 degrees. The aircraft tracked directly to the Simpsons Gap Locator, arriving there at about 4,300 ft. After passing the Simpsons Gap Locator, the aircraft continued to the Temple Bar Locator, arriving there at about 3,500 ft. Beyond this point, the aircraft continued to track approximately 112 degrees M and descended to 2,300 ft, where it leveled briefly before climbing slightly immediately before impact. The aircraft struck the top of the Ilparpa Range at 2250 feet.

The following factors were considered significant in the accident sequence:
1. There were difficulties in the cockpit relationship between the pilot in command and the co-pilot.
2. The level of crew resource management demonstrated by both crew members during the flight was low.
3. The Alice Springs locator/NDB approach was unique.
4. The briefing for the approach conducted by the pilot in command was not adequate.
5. When asked for the 'minima' by the pilot in command, the co-pilot called, and the pilot in command accepted, an incorrect minimum altitude for the aircraft category and for the segment of the approach.
6. The technique employed by the pilot in command in flying the approach involved a high cockpit workload.
7. The crew did not use the radio altimeter during the approach.

Accident investigation:
Investigating agency: BASI
Report number: BASI report 9501246
Status: Investigation completed
Duration: 1 year and 4 months
Download report: Final report


ATSB Occurrence Number 9501246



photo (c) Phil Williams; near Alice Springs Airport, NT (ASP); 19 June 2016

photo (c) Phil Williams; near Alice Springs Airport, NT (ASP); 19 June 2016

photo (c) Phil Williams; near Alice Springs Airport, NT (ASP); 19 June 2016

photo (c) via Werner Fischdick; Sydney-Kingsford Smith Airport, NSW (SYD); August 1994

Revision history:


The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF on social media FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2024 Flight Safety Foundation

1920 Ballenger Av, 4th Fl.
Alexandria, Virginia 22314