Flugunfall 19 FEB 2000 einer McDonnell Douglas DC-8-63F N811CK - Seattle/Tacoma International Airport, WA (SEA)
ASN logo

Status:Accident investigation report completed and information captured
Datum:Samstag 19 Februar 2000
Flugzeugtyp:Silhouette image of generic DC86 model; specific model in this crash may look slightly different
McDonnell Douglas DC-8-63F
Fluggesellschaft:Kitty Hawk International
Kennzeichen: N811CK
Werknummer: 46147/549
Baujahr: 1971
Besatzung:Todesopfer: 0 / Insassen: 3
Fluggäste:Todesopfer: 0 / Insassen: 0
Gesamt:Todesopfer: 0 / Insassen: 3
Sachschaden: schwer beschädigt
Konsequenzen: Repaired
Unfallort:Seattle/Tacoma International Airport, WA (SEA) (   USA)
Flugphase: Start (TOF)
Flug von:Seattle/Tacoma International Airport, WA (SEA/KSEA), USA
Flug nach:Anchorage-Ted Stevens International Airport, AK (ANC/PANC), USA
The DC-8-63F airplane operated on a cargo flight from Seattle-Tacoma International Airport, Washington, to Anchorage, Alaska. The aircraft lost its number 1 and 2 engine cowlings on takeoff from Seattle. Following the separation of the cowlings, the flight returned to Seattle-Tacoma International and landed without further incident. There were no injuries. Post-accident inspection of the aircraft revealed substantial damage to the aircraft's left wing and left horizontal stabilizer.

The aircraft maintenance log indicated that on the previous flight (from Anchorage to Seattle, arriving at 07:18), the flight crew had written up discrepancies that the number 2 engine would not go into reverse thrust, and that the captain's course deviation indicator (CDI) was frozen. The frozen captain's CDI was determined to be a non-deferrable, Aircraft-on-Ground (AOG) item. There was also a deferred maintenance item (DMI) on the number 1 thrust reverser. Due to concerns expressed by the captain of the incoming flight about the operability of the thrust reversers in consideration of icy runway conditions at Anchorage, maintenance also decided to lube, inspect, and check all four thrust reversers for proper operation.
One mechanic working on the number 2 thrust reverser asked the mechanic working on the number 1 thrust reverser to finish up the aircraft and close all engine cowls, since he had already worked over three hours overtime.
The mechanic who worked on the number 1 thrust reverser, and who was asked by the first mechanic to close all engine cowls, reported that he lowered the number 1 and 2 cowling doors, but that he and another mechanic were unable to secure and lock the doors. He stated that about 16:00, they returned to the shop for assistance in locking and securing the cowling doors. He stated that at that time, he entered in the turnover log that all four cowling doors required securing, and also verbally reported this to two other mechanics from the next shift.
One of the company mechanics who took the turnover report on the cowl doors from the first-shift mechanic stated that at about 1530, he received a tie-in from that mechanic (the one assigned to the number 1 thrust reverser) that all cowlings on N811CK needed to be closed.
He noted that the cowlings for the number 1 and number 2 engines were closed and that those for the number 3 and 4 engines were wide open. He assisted in closing the number 3 engine cowl, but did not check the number 1 or number 2 cowlings to ensure that they were secured.
The captain reported that his first indication of any problems was at rotation, when the number 2 engine N2 (high pressure section) RPM indication went to zero and the number 2 engine generator light came on. He stated he also noticed the aircraft roll left slightly at that time. The captain reported that he and his crew were diagnosing the problem when the control tower called and notified him that his aircraft had left debris on the runway during takeoff. The captain stated that he then called company headquarters in Ypsilanti, Michigan, and decided to return to Seattle-Tacoma International.

The flight engineer reported that the cowlings were closed when he arrived at the aircraft, that he observed no abnormalities during the exterior preflight inspection.

The number 1 and 2 engine cowls completely departed the aircraft during the accident sequence. Several cowl sections were found on the Seattle-Tacoma International Airport runway; two cowling sections were also found in a residential area in the Browns Point area of Tacoma, Washington, approximately 10 nautical miles south-southwest of the airport.

Probable Cause:

PROBABLE CAUSE: "Inadequate inspection of the number 1 and 2 engine cowls by company maintenance personnel and inadequate preflight inspection by the flight engineer, resulting in unsecured cowls separating from the aircraft during takeoff. A factor was unsecured number 1 and 2 engine cowls."

Accident investigation:

Investigating agency: NTSB
Status: Investigation completed
Duration: 1 year and 3 months
Accident number: SEA00LA046
Download report: Summary report



Add your photo of this accident or aircraft

This map shows the airport of departure and the intended destination of the flight. The line between the airports does not display the exact flight path.
Distance from Seattle/Tacoma International Airport, WA to Anchorage-Ted Stevens International Airport, AK as the crow flies is 2309 km (1443 miles).

This information is not presented as the Flight Safety Foundation or the Aviation Safety Network’s opinion as to the cause of the accident. It is preliminary and is based on the facts as they are known at this time.
languages: languages


The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF on social media FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2024 Flight Safety Foundation

1920 Ballenger Av, 4th Fl.
Alexandria, Virginia 22314