Flugunfall 25 NOV 2013 einer Douglas C-118A Liftmaster (DC-6A) N100CE - Nuiqsut, AK
ASN logo
 

Status:Accident investigation report completed and information captured
Datum:Montag 25 November 2013
Zeit:10:21
Flugzeugtyp:Silhouette image of generic DC6 model; specific model in this crash may look slightly different
Douglas C-118A Liftmaster (DC-6A)
Fluggesellschaft:Everts Air Cargo
Kennzeichen: N100CE
Werknummer: 44662/629
Baujahr: 1955
Triebwerk: 4 Pratt & Whitney R-2800
Besatzung:Todesopfer: 0 / Insassen: 3
Fluggäste:Todesopfer: 0 / Insassen: 0
Gesamt:Todesopfer: 0 / Insassen: 3
Sachschaden: schwer beschädigt
Konsequenzen: Repaired
Unfallort:Nuiqsut, AK (   USA)
Flugphase: Während des Fluges (ENR)
Betriebsart:Frachtflug
Flug von:Deadhorse-Alpine Airstrip, AK (DQH/PALP), USA
Flug nach:Nuiqsut Airport, AK (NUI/PAQT), USA
Unfallbericht:
According to the operator, the purpose of the short, 22 minute flight from Alpine Airstrip was to deliver a load of oversized, oil drilling tools to a remote oil production site. The flightcrew reported that shortly after takeoff the first officer noticed that the airplane's elevator control movements appeared to be "momentarily stiff."
While en route to the destination, the flight engineer was asked to inspect the cargo, and he subsequently discovered that two of the four, 31-foot (9.45 m) long oil drilling tools had shifted aft, damaging the aft pressure bulkhead. The captain did not declare an emergency, and the airplane landed at the destination without incident.
A postflight inspection revealed substantial damage to the aft pressure bulkhead assembly, as well as various frames, stringers and structural longerons. In addition, several attachments for the elevator flight control pulleys and flight control cable guides were damaged. The operator noted that the airplane's pressurization system had been removed years ago, when the airplane was converted to a cargo configuration.
The operator reported that after loading the airplane, just before departure, the crew inspected the five nylon strapping mechanisms that secured the four drilling tools to the floor of the airplane. The crew reported that all five of the nylon straps were tight before departure, but gathered that one or more had loosened slightly during taxi and takeoff, allowing two of the tools to shift aft during takeoff. The crew also noted that the drilling tools were covered with ice and snow, which likely aided in the tools sliding along the aluminum, diamond plate-covered floor of the airplane.

Probable Cause:

PROBABLE CAUSE: "A load shift during takeoff, which resulted in substantial damage to the aft bulkhead and associated structures."

Accident investigation:

cover
Investigating agency: NTSB
Status: Investigation completed
Duration: 149 days (5 months)
Accident number: ANC14CA012
Download report: Summary report

Informationsquelle:
» NTSB


Fotos

photo of Douglas-C-118A-Liftmaster-N100CE
accident date: 25-11-2013
type: Douglas C-118A Liftmaster (DC-6A)
registration: N100CE
 

Map
This map shows the airport of departure and the intended destination of the flight. The line between the airports does not display the exact flight path.
Distance from Deadhorse-Alpine Airstrip, AK to Nuiqsut Airport, AK as the crow flies is 15 km (9 miles).

This information is not presented as the Flight Safety Foundation or the Aviation Safety Network’s opinion as to the cause of the accident. It is preliminary and is based on the facts as they are known at this time.
languages: languages

Share

The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF on social media FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2024 Flight Safety Foundation

1920 Ballenger Av, 4th Fl.
Alexandria, Virginia 22314
www.FlightSafety.org