ASN logo
ASN Wikibase Occurrence # 170283
Last updated: 29 June 2021
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Date:04-OCT-2014
Time:c. 19:45
Type:Silhouette image of generic A332 model; specific model in this crash may look slightly different
Airbus A330-243
Owner/operator:Emirates
Registration: A6-EAQ
MSN: 518
Fatalities:Fatalities: 0 / Occupants: 82
Other fatalities:0
Aircraft damage: None
Category:Serious incident
Location:Karachi-Jinnah International Airport (KHI/OPKC) -   Pakistan
Phase: Taxi
Nature:Passenger - Scheduled
Departure airport:Karachi-Jinnah International Airport (KHI/OPKC)
Destination airport:Dubai Airport (DXB/OMDB)
Investigating agency: GCAA UAE
Narrative:
Emirates Airline flight EK609, from Jinnah International Airport (JIAP), Karachi, Pakistan, to Dubai International Airport (OMDB), the United Arab Emirates, with 14 crewmembers and 68 passengers onboard was operated by an Airbus A330 aircraft, registration A6-EAQ. As preparations for departure were completed the flight crew sensed an odor accompanied by a yellow hydraulic system low pressure indication on the electronic centralized aircraft monitoring (ECAM) system.
The odor was due to hydraulic fluid mist that entered the cabin and cockpit through the airconditioning system. The source of the hydraulic fluid mist was leakage from a fractured hose that provides hydraulic pressure to the rudder yellow system actuator. The leaking hydraulic fluid entered the auxiliary power unit (APU) from where it entered the airconditioning system. Examination of the hose concluded that the cause of the fracture was, most probably, fatigue failure of the metal braiding, followed by fracture of the hose PTFE core pipe.
The mist filled the cockpit and cabin and caused difficulty in breathing, throat discomfort, and eye irritation for some occupants.
In an attempt to determine the source of the mist, which was perceived as smoke, the cabin crewmember located at the L3 door handed a fire extinguisher and protective breathing equipment (PBE) to the cabin crewmember stationed at door L1A, and after the latter had donned the equipment and pulled the lanyard to activate the PBE oxygen generator, the PBE caught fire. The crewmember removed the PBE immediately and threw it on the floor next to the L3 door. This caused a localized fire that was suppressed by other crewmembers.
Based on initial information, the Commander decided to return the aircraft to the stand and disembark the passengers and crew using steps. The Commander requested information about the situation in the cabin from the L4 cabin crewmember, who stated that visibility in the cabin was now limited to four rows. On receiving this information, the Commander decided to order an evacuation while the aircraft was at its final pushback position.
The evacuation of the aircraft was well-managed with only minor injuries to some of the passengers. Following the evacuation, the passengers stayed close to the aircraft as they were not given directions as to what to do or where to go. On becoming aware of the evacuation of the aircraft, ATC did not issue any instruction to halt airside operations, and several aircraft and vehicles continued moving.
The Air Accident Investigation Sector (AAIS) determined that the cause of the dense mist was the failure of a yellow hydraulic system rudder servo hose that allowed leaking hydraulic fluid to enter the APU, become heated and atomized, and then to be fed into the aircraft airconditioning system. The cause of the hydraulic hose failure was not determined by the Investigation. The AAIS determined that it is probable that manufacturing defects in the PBE candle caused the candle to ignite abnormally when the cabin crewmember pulled the activation lanyard.
A contributing factor to the Incident was that the flight crew were unable to identify the source of the mist/smoke and decided to leave the APU running in case it became necessary to shutdown both engines

Sources:

https://www.gcaa.gov.ae/en/pages/NewsDetails.aspx?NewsID=433

Accident investigation:
cover
  
Investigating agency: GCAA UAE
Status: Investigation completed
Duration:
Download report: Final report

Media:


Images:

Photo of A6-EAQ courtesy AirHistory.net


Newcastle - International (EGNT / NCL)
23 April 2009; (c) Malcolm Clarke

Revision history:

Date/timeContributorUpdates
04-Oct-2014 15:58 harro Added
04-Oct-2014 16:00 harro Updated [Embed code, Narrative]
04-Oct-2014 18:32 harro Updated [Aircraft type, Embed code, Narrative]
04-Oct-2014 19:08 BLT Updated [Source]
22-Jul-2016 08:49 harro Updated [Phase, Source, Damage, Narrative]

Corrections or additions? ... Edit this accident description