ASN logo
ASN Wikibase Occurrence # 201960
Last updated: 1 December 2020
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Type:Silhouette image of generic C182 model; specific model in this crash may look slightly different
Cessna 182A
Registration: N3753D
C/n / msn: 34453
Fatalities:Fatalities: 0 / Occupants: 2
Other fatalities:0
Aircraft damage: Substantial
Location:Conner, MT -   United States of America
Phase: Unknown
Departure airport:MT30
Destination airport:
Investigating agency: NTSB
The pilot attempted to land on a 1,500 foot grass strip. He said that the airplane touched down 'on the numbers', but he was unable to stop the aircraft due to water and slush on the airstrip. He reported that the aircraft was 'hydroplaning across the grass' and when he applied the aircraft's brakes they 'locked up.' The pilot elected to initiate a go-around. Shortly after lift-off, the aircraft's main wheels collided with a four-foot deep snow bank at the departure end of runway. The nose gear was torn from the aircraft and the fuselage was damaged. The pilot reported no mechanical failures or malfunctions with the aircraft prior to the accident.
Probable Cause: The pilots delayed remedial action during an aborted landing. Factors include a slush-covered runway.



Revision history:

26-Nov-2017 10:00 ASN Update Bot Added

Corrections or additions? ... Edit this accident description