ASN Wikibase Occurrence # 215448
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Tuesday 19 July 2016 |
Time: | 10:00 |
Type: | Aeropro CZ Aerotrek A220 |
Owner/operator: | Private |
Registration: | N151J |
MSN: | 37513 |
Year of manufacture: | 2013 |
Total airframe hrs: | 179 hours |
Engine model: | Rotax 912ULS |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | McCarthy, AK -
United States of America
|
Phase: | Take off |
Nature: | Private |
Departure airport: | McCarthy, AK (15Z) |
Destination airport: | Wasilla, AK (IYS) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The private pilot reported that, during the takeoff roll in the experimental amateur-built light-sport airplane, the engine began surging. He was unable to compensate for the sudden increase in left turning tendency when the engine power increased, and subsequently experienced a loss of control. Video footage of the accident was consistent with the pilot’s statement. Examination of the engine, which was equipped with a two-carburetor system, revealed that one carburetor throttle valve lever was bent inward and made contact with the carburetor chamber top. While manipulating the throttle control from inside the cockpit, the throttle valve lever was observed moving only slightly before contacting the carburetor chamber top, which restricted its movement. This resulted in the carburetor being at the idle position during the point of contact. The other carburetor was free of anomalies and operated as designed.
During an engine test run with an exemplar engine of the same make and model, the carburetor throttle valve lever was modified to duplicate that found on accident engine. The engine was run at various power settings before applying full power. At full engine power, the carburetor throttle valve lever stuck against the chamber top and the engine ran rough and would not accelerate to maximum rpm. The carburetor throttle valve lever was then manually pushed forward past the point of contact on the carburetor chamber top, resulting in a burst of engine power immediately followed by smooth engine operation at maximum rpm.
Probable Cause: The pilot’s failure to maintain directional control during the takeoff roll, which resulted in a loss of control and impact with terrain. Contributing to the accident were engine power surges due to the bent carburetor throttle valve lever.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | ANC16LA047 |
Status: | Investigation completed |
Duration: | 2 years 1 month |
Download report: | Final report |
|
Sources:
NTSB
Location
Revision history:
Date/time | Contributor | Updates |
16-Sep-2018 19:08 |
ASN Update Bot |
Added |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation