ASN Wikibase Occurrence # 216768
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Sunday 21 December 1986 |
Time: | 15:30 |
Type: | Cessna 207 |
Owner/operator: | |
Registration: | VH-UBX |
MSN: | |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Location: | Wilton, NSW -
Australia
|
Phase: | Unknown |
Nature: | Parachuting |
Departure airport: | Wilton, NSW |
Destination airport: | Wilton, NSW |
Investigating agency: | BASI |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:A student parachutist was exiting the aircraft for a static line jump, when a portion of the main canopy became entangled around the right horizontal stabiliser. Approximately half the right elevator was torn away, together with a portion of the trim tab, while the outer section of the stabiliser was bent downwards through 45 degrees. The parachutist landed safely, and the jump instructor then made a normal descent. The pilot was able to retain control of the aircraft, and elected to divert to a more suitable aerodrome, where an uneventful landing was subsequently carried out. The parachutists were using a static line bag deployment system. This system does not require a pilot parachute to extract the main canopy from its container, but the airspeed and attitude of the aircraft are critical to ensure safe operations. On this occasion, it was probable that the airspeed was higher than desirable at the time the parachutist exited the aircraft. However, the parachute school had not provided specific operating instructions for pilots engaged in this particular form of parachute dropping. In addition, it was considered that the static line attachment point was in a less than optimum position inside the aircraft, in that it reduced the available vertical distance between the attachment and the tailplane. It was also possible that the parachute may have been incorrectly packed, leading to earlier than normal deployment.
Accident investigation:
|
| |
Investigating agency: | BASI |
Report number: | |
Status: | Investigation completed |
Duration: | |
Download report: | Final report |
|
Sources:
https://www.atsb.gov.au/publications/investigation_reports/1986/aair/aair198602364/ https://www.atsb.gov.au/media/31745/aair198602364.pdf Revision history:
Date/time | Contributor | Updates |
27-Oct-2018 22:25 |
Pineapple |
Added |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation