ASN Wikibase Occurrence # 37139
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Wednesday 24 April 1996 |
Time: | 11:07 LT |
Type: | Piper PA-25-150 Pawnee |
Owner/operator: | D & E Company |
Registration: | N6254Z |
MSN: | 25-314 |
Total airframe hrs: | 3068 hours |
Engine model: | Lycoming O-320-A2B |
Fatalities: | Fatalities: 1 / Occupants: 2 |
Aircraft damage: | Destroyed |
Category: | Accident |
Location: | Buffalo, MO -
United States of America
|
Phase: | Manoeuvring (airshow, firefighting, ag.ops.) |
Nature: | Unknown |
Departure airport: | (H17) |
Destination airport: | (H17) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The Piper PA-25 (acft), being used to develop an STC, was modified by installing 2nd seat in hopper area & extending canopy forward. On 6/30/95, operator reported to FAA that flight conformance testing to date had reflected no change in acft performance versus original configuration. Acft was equipped with external airspeed calibration device for an airspeed calibration flight, & it was loaded with 560 lbs of ballast to meet max gross wt & forward CG requirements for STC testing. Wind was gusty, & temp was 64 deg (about 30 deg warmer than on day of previous test flight). Pilot reported that after takeoff from runway 21, he maintained best rate of climb speed & 2525-2550 engine rpm, then best angle of climb speed, but acft would not climb. He then turned downwind & attempted to return to same runway; however, acft collided with trees & crashed about 1/2 mi east of airport. A witness said that during takeoff, acft lifted off, then began a left turn about half way down the runway. Pilot said that a climbing turn was made to allow for more clearance from obstacles at south end of airport. Witnesses said acft then turned north & remained at low altitude & airspeed until it hit trees & crashed. Fire then erupted, & acft was demolished. Investigation revealed that standard (original) wing root & landing gear (strut) fairings were not installed. Piper reported that removal of wing root fairings would significantly reduce wing lifting capability & change airflow over horizontal tail, requiring more elevator deflection for maneuvering. Absence of landing gear fairings would have increased drag, slightly.
Probable Cause: failure of company/operator personnel to install the wing and landing gear (strut) fairings after modifying the airplane for a supplemental type certificate (STC), and improper planning/decision by the pilot. Factors relating to the accident were: the airplane's reduced performance, and high obstructions.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | CHI96FA141 |
Status: | Investigation completed |
Duration: | 1 year 1 month |
Download report: | Final report |
|
Sources:
NTSB CHI96FA141
Location
Revision history:
Date/time | Contributor | Updates |
24-Oct-2008 10:30 |
ASN archive |
Added |
26-Aug-2012 06:50 |
Anon. |
Updated [Source] |
21-Dec-2016 19:23 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
09-Apr-2024 07:18 |
ASN Update Bot |
Updated [Time, Other fatalities, Source, Narrative, Category, Accident report] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation