ASN Wikibase Occurrence # 176157
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Friday 2 April 2004 |
Time: | 09:09 |
Type: | Cessna 172R |
Owner/operator: | Western Michigan University |
Registration: | N986AV |
MSN: | 17280580 |
Year of manufacture: | 1998 |
Total airframe hrs: | 2647 hours |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Kalamazoo, MI -
United States of America
|
Phase: | Landing |
Nature: | Training |
Departure airport: | Kalamazoo, MI (AZO) |
Destination airport: | |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The airplane, operated by a university aviation training program as a student solo instructional flight, veered off runway 05 during landing. The flight was the student pilot's second solo flight at which time he had accumulated a total flight time of 28 hours. The university placed a maximum crosswind limitation of 5 knots for the student pilot's solo flight. Visual meteorological conditions prevailed with winds from 340 degrees at 13 knots at the time of the accident. The student pilot performed eight takeoff and landings on runway 35 when the tower air traffic controller instructed the student pilot to change to runway 05. The student pilot complied with the instruction and landed on runway 05 using a 30-degree flap setting. The airplane information manual states that in strong crosswinds a minimum flap setting required for field length should be used. Federal Aviation Order states that air traffic control (ATC) is to use the runway most nearly aligned with the wind when the wind is 5 knots or more. There was no runway in use program in effect for the accident runway. The order notes that if a pilot prefers to use a runway different from the one specified, the pilot is expected to advise ATC. The student pilot did not advise ATC of his preference of runway use.
Probable Cause: The air traffic control procedures/directives not followed by tower air traffic controller, the inadequate compensation for wind conditions by the student pilot during landing, the lack of total experience by the student pilot, and the recommended crosswind flap setting not followed by the student pilot. The crosswind conditions were a contributing factor.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | CHI04LA097 |
Status: | Investigation completed |
Duration: | |
Download report: | Final report |
|
Sources:
NTSB:
https://www.ntsb.gov/_layouts/ntsb.aviation/brief.aspx?ev_id=20040412X00447&key=1 Location
Images:
Beaver Airport 2013
Revision history:
Date/time | Contributor | Updates |
16-May-2015 17:50 |
Noro |
Added |
26-Mar-2016 10:25 |
Anon. |
Updated [Photo, ] |
21-Dec-2016 19:30 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
07-Dec-2017 17:53 |
ASN Update Bot |
Updated [Operator, Other fatalities, Nature, Departure airport, Destination airport, Source, Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation