ASN Wikibase Occurrence # 186331
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Sunday 10 April 2016 |
Time: | 19:07 |
Type: | Piper PA-28-140 Cherokee |
Owner/operator: | Private |
Registration: | N95118 |
MSN: | 28-25812 |
Year of manufacture: | 1969 |
Total airframe hrs: | 12064 hours |
Engine model: | Lycoming O-320 SERIES |
Fatalities: | Fatalities: 0 / Occupants: 2 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Near Bayport Aerodrome (23N), Bayport, Long Island, NY -
United States of America
|
Phase: | Approach |
Nature: | Private |
Departure airport: | Bayport, NY (23N) |
Destination airport: | Montgomery, NY (MGJ) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The private pilot reported that, shortly after takeoff, the airplane's engine experienced a total loss of power. The pilot attempted to return to land at the airport, but the airplane was too low and struck trees and power lines; a postimpact fire ensued. Postaccident examination of the airplane revealed that the fuel selector valve was loose and did not fit securely into its respective detents. The valve was removed and exhibited blue-colored staining consistent with a fuel leak. The valve was disassembled, and numerous tool marks were observed on the valve cap, consistent with it having been disassembled many times. Removal of the valve's internal components revealed that they were not installed in the order outlined in the airplane's service manual. Additionally, the valve's components were worn; the position washer, which keeps the valve from rotating beyond the detents, was worn on both sides and appeared to have been inverted and reused rather than being replaced.
According to the airplane's service manual, the fuel selector is to be inspected every 400 hours. The inspection requires the valve cap and the internal components to be removed and inspected, including the position washer, for signs of extreme wear. If the position washer exhibits such wear, it should be replaced. The valve was examined about 98.1 hours before the accident, at which time only an O-ring was replaced; at a minimum, the valve components’ wear should have been evident at that time. The condition of the fuel selector and its internal components, particularly the position washer, is consistent with improper installation and maintenance, which allowed the fuel selector valve to be placed in a position between detents and resulted in fuel starvation to the engine.
Probable Cause: Maintenance personnel’s improper installation and maintenance of the fuel selector valve, which resulted in a total loss of engine power due to fuel starvation.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | ERA16LA152 |
Status: | Investigation completed |
Duration: | 2 years and 3 months |
Download report: | Final report |
|
Sources:
NTSB
FAA register:
http://registry.faa.gov/aircraftinquiry/NNum_Results.aspx?NNumbertxt=95118 Location
Images:
Photo: FAA
Revision history:
Date/time | Contributor | Updates |
11-Apr-2016 01:27 |
Geno |
Added |
11-Apr-2016 01:34 |
Geno |
Updated [Damage, Narrative] |
12-Apr-2016 15:24 |
Geno |
Updated [Source, Narrative] |
21-Dec-2016 19:30 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
22-Jul-2018 18:49 |
ASN Update Bot |
Updated [Nature, Departure airport, Destination airport, Source, Narrative] |
22-Jul-2018 19:03 |
harro |
Updated [Source, Narrative, Photo, ] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation