ASN logo
ASN Wikibase Occurrence # 197256
Last updated: 16 July 2018
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Date:09-AUG-2017
Time:12:20
Type:Silhouette image of generic C172 model; specific model in this crash may look slightly different
Cessna 172S Skyhawk
Owner/operator:Kcsi Texas Inc
Registration: N5274Q
C/n / msn: 172S9199
Fatalities:Fatalities: 0 / Occupants: 2
Other fatalities:0
Aircraft damage: Substantial
Category:Accident
Location:Jackson County, NW of Wellston, OH -   United States of America
Phase: Manoeuvring (airshow, firefighting, ag.ops.)
Nature:Survey
Departure airport:Newark, OH (VTA)
Destination airport:Jackson, OH (I43)
Investigating agency: NTSB
Narrative:
The commercial pilot and observer were conducting an aerial observation flight of a pipeline. The pilot reported that, while maneuvering at a low altitude toward an airport to refuel, he heard a “significant boom” and noticed a reduction in engine rpm. The pilot unsuccessfully attempted to regain engine power and then initiated a forced landing to a space between trees. During the forced landing, the airplane impacted rolling, uneven grass terrain and a barbed wire fence.
Examination and disassembly of the engine revealed a large hole on the top of the engine crankcase inboard of the No. 4 cylinder. The examination revealed that the No. 4 connecting rod had failed due to the installation of a nonconforming small end connecting rod bushing. Five days before the accident, the engine manufacturer had issued a mandatory service bulletin indicating that the accident connecting rod bushing may not have met engine specifications and may require followup action. Six days after the accident, the Federal Aviation Administration issued an airworthiness directive that required inspecting the connecting rods, replacing affected connecting rod small end bushings, and accomplishing the instructions in the engine manufacturer’s mandatory service bulletin.



Probable Cause: The failure of a connecting rod small end bushing, which resulted in a loss of engine power.

Sources:

NTSB: https://www.ntsb.gov/_layouts/ntsb.aviation/brief.aspx?ev_id=20170810X44833&key=1
https://www.google.com/maps/@?dg=dbrw&newdg=1/OH-327+%26+Loop+Rd,+Wellston,+OH+45692/@39.1622206,-82.6198444,18z/data=!4m2!3m1!1s0x8847b4246217054f:0xa6be6f2477afd6ff?hl=en-us

FAA register: http://registry.faa.gov/aircraftinquiry/NNum_Results.aspx?NNumbertxt=5274Q

Accident investigation:
cover
  
Investigating agency: NTSB
Status: Investigation completed
Duration: 6 months
Download report: Final report


Revision history:

Date/timeContributorUpdates
10-Aug-2017 05:53 Geno Added
07-Feb-2018 13:47 ASN Update Bot Updated [Time, Operator, Departure airport, Destination airport, Source, Narrative]

Corrections or additions? ... Edit this accident description