ASN Wikibase Occurrence # 203598
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Friday 29 December 2017 |
Time: | 20:30 |
Type: | Cessna 210J Centurion |
Owner/operator: | Private |
Registration: | N222AT |
MSN: | 21059098 |
Year of manufacture: | 1968 |
Total airframe hrs: | 7120 hours |
Engine model: | Continental IO 520 SERIES |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | San Bernardino International Airport (KSBD), San Bernardino, CA -
United States of America
|
Phase: | Landing |
Nature: | Private |
Departure airport: | Chino, CA (CNO) |
Destination airport: | San Bernardino, CA (SBD) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The airplane was at a maintenance facility for an annual inspection, which had not been completed, and the airplane had not been returned to an airworthy condition. Despite this, the private pilot picked up his airplane from the maintenance facility to fly it to his base airport. While in the traffic pattern, the pilot lowered the main landing gear (MLG) but noted that the left MLG was not fully extended. The pilot attempted to manually extend the MLG to no avail and subsequently landed the airplane with the left MLG retracted.
Postaccident examination of the left MLG revealed that the saddle assembly had fractured. The assembly was removed for metallurgical examination, which revealed that the saddle fracture surfaces exhibited features consistent with fatigue.
An airworthiness directive (AD) required that the MLG saddles be inspected for cracks using the dye-penetrant procedure as part of the annual inspection. The mechanic who was conducting the annual inspection reported that he had not inspected the landing gear before the pilot took the airplane and that he had informed the pilot that the annual inspection was not complete and that he was not signing the airplane off as airworthy. It is likely that, if the AD had been complied with and the pilot had not taken the airplane before the annual inspection was complete, the preexisting crack would likely have been identified during the inspection of the MLG saddles.
Probable Cause: The fatigue failure of the left main landing gear (MLG) saddle, which resulted in the pilot’s inability to extend the left MLG. Contributing to the accident was the pilot’s improper decision to fly the airplane before the annual inspection was completed and the airplane returned to service in an airworthy condition.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | WPR18LA058 |
Status: | Investigation completed |
Duration: | 1 year and 2 months |
Download report: | Final report |
|
Sources:
NTSB
FAA register:
http://registry.faa.gov/aircraftinquiry/NNum_Results.aspx?NNumbertxt=N222AT https://flightaware.com/live/flight/N222AT Location
Media:
Revision history:
Date/time | Contributor | Updates |
30-Dec-2017 17:31 |
Geno |
Added |
31-Dec-2017 00:45 |
Iceman 29 |
Updated [Time, Source, Embed code] |
22-Mar-2019 19:12 |
ASN Update Bot |
Updated [Time, Operator, Nature, Departure airport, Destination airport, Source, Embed code, Damage, Narrative, Accident report, ] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation