ASN Wikibase Occurrence # 224070
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Saturday 27 October 2018 |
| Time: | |
| Type: |  BRM Aero Bristell LSA |
| Owner/operator: | |
| Registration: | |
| MSN: | |
| Fatalities: | Fatalities: 0 / Occupants: 2 |
| Aircraft damage: | Minor |
| Location: | Bankstown Airport (YSBK), Bankstown, NSW -
 Australia
|
| Phase: | Landing |
| Nature: | Training |
| Departure airport: | |
| Bankstown Airport, NSW (BWU/YSBK) | |
| Confidence Rating: |  Information verified through data from accident investigation authorities |
During dual flight training the instructor was to demonstrate a simulated engine failure at 100 feet. The takeoff was normal and at 100 feet, they reduced the throttle to the idle position and set glide attitude. However, they descended at a much faster rate than normal, resulting in the aircraft bouncing on the runway and the nose gear collapsing.
Sources:
https://www.raa.asn.au/safety/accident-and-defect-summaries/
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 17-Apr-2019 09:07 | Pineapple | Added |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation