ASN Wikibase Occurrence # 29474
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Sunday 28 March 2004 |
Time: | 15:20 |
Type: | Schleicher ASW 20 TOP |
Owner/operator: | Private |
Registration: | N232EM |
MSN: | 20061 |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Yoder, KS -
United States of America
|
Phase: | Initial climb |
Nature: | Private |
Departure airport: | Yoder, KS (SN76) |
Destination airport: | Yoder, KS (SN76) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The experimental sailplane impacted an agricultural field after losing elevator control during initial climb on an aero-tow. Post accident examination of the elevator control system revealed the elevator Louis L'Hotellier ball and swivel joint had become disengaged, which resulted in the loss of elevator control. The Louis L'Hotellier fitting consists of a ball and swivel joint that connects the elevator control rod to the control surface. The purpose of the fitting is to allow the quick disassembly and reassembly of a sailplane. Several airworthiness directives (AD) have been issued for Louis L'Hotellier type fittings in order to "prevent the connectors from becoming inadvertently disconnected, which could result in loss of control of the sailplane or glider." The AD requires the lock plates to be secured either by a safety pin, wire, or other approved method. One specific AD further requires the installation of a placard that states, "All L'Hotellier control system connectors must be secured with safety wire, pins, or safety sleeves, as applicable, prior to operation." According to the pilot, he did not install a safety pin or wire on the elevator fitting prior to the accident flight. Additionally, he reported the sailplane was not equipped with the placard requiring a securing device to be used. The pilot was the owner of the sailplane. The pilot reported completing a "positive control check... although a second person was not available to help." The recognized method of performing a positive control check involves two individuals; one to hold the control surface stationary, while the other individual attempts to move the control stick.
Probable Cause: The pilot's failure to secure the elevator Louis L'Hotellier connector with a safety pin or wire as directed in several airworthiness directives and his inadequate preflight inspection of the sailplane, both of which resulted in the in-flight loss of elevator control due to the inadvertent disengagement of the elevator Louis L'Hotellier connector.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | CHI04CA090 |
Status: | Investigation completed |
Duration: | |
Download report: | Final report |
|
Sources:
NTSB:
https://www.ntsb.gov/_layouts/ntsb.aviation/brief.aspx?ev_id=20040402X00417&key=1 Location
Revision history:
Date/time | Contributor | Updates |
27-Sep-2008 01:00 |
ASN archive |
Added |
09-Jan-2009 11:42 |
harro |
Updated |
21-Dec-2016 19:16 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
21-Dec-2016 19:20 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
07-Dec-2017 17:47 |
ASN Update Bot |
Updated [Operator, Departure airport, Destination airport, Source, Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation